Iiyama Computer Monitor MA203DT D User Manual

MA203DT D  
USER MANUAL  
TABLE OF CONTENTS  
ENGLISH  
DEUTSCH  
FRANCAIS  
NEDERLANDS  
SVENSKA  
ITALIANO  
FOR YOUR SAFETY............................................................ 1  
SAFETY PRECAUTIONS............................................ 1  
CUSTOMER SERVICE................................................ 3  
CLEANING...................................................................  
3
BEFORE YOU OPERATE THE MONITOR..........................  
FEATURES..................................................................  
ACCESSORIES...........................................................  
4
4
4
5
5
6
7
OPTIONAL PARTS.....................................................  
FOR WINDOWS 95/98/2000/ME/XP USERS...............  
LOCATION OF CONTROLS........................................  
CONNECTING YOUR MONITOR.................................  
OPERATING THE MONITOR................................................  
ADJUSTMENT MENU CONTENTS..............................  
POWER MANAGEMENT FEATURE.............................  
8
9
13  
TROUBLE SHOOTING........................................................  
14  
APPENDIX............................................................................  
SPECIFICATIONS.......................................................  
PRESET MODES.........................................................  
CONNECTOR PINASSIGNMENT.................................  
16  
16  
17  
17  
Thank you very much for choosing the iiyama Vision Master color monitor.  
We recommend that you take a few minutes to read carefully through this brief but  
comprehensive manual before installing and switching on the monitor. Please keep  
this manual in a safe place for your future reference.  
 
FCC DECLARATION OF CONFORMITY  
Model Number:  
Trade Name:  
MA203DT D  
iiyama  
Responsible party:  
Address:  
IIYAMA North America, Inc.  
65 West Street Road, Suite 101B, Warminster, PA 18974 U.S.A.  
215-682-9050  
Telephone number:  
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:  
(1) This equipment may not cause harmful interference, and (2) this equipment must accept any interference  
received, including interference that may cause undesired operation.  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to  
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful  
interference when the equipment is operated in a residential environment. This equipment generates, uses and  
can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may  
cause harmful interference to radio communications. However, there is no guarantee that interference will not  
occur in a particular installation. If you determine the equipment does cause harmful interference to radio or  
television reception (this may be determined by monitoring the interference while turning the equipment off  
and on), you are encouraged to try to correct the interference by one of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the  
receiver is connected.  
Consult the dealer or an experienced radio or TV technician for help.  
To meet the FCC requirements, the specified signal cables below should be used.  
Signal Cable MB38 (Enclosed): 242Z050-01  
Signal Cable MB31 (Optional): 242Z017-01  
CAUTION  
Changes or modifications not expressly approved by iiyama could void the users authority  
to operate the equipment under FCC compliance regulations.  
CANADIAN DEPARTMENT OF COMMUNICATIONS COMPLIANCE  
STATEMENT  
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus  
as set out in the radio interference regulation of the Canadian department of communications.  
CE MARKING DECLARATION OF CONFORMITY  
This Color Data Monitor complies with the requirements of the EC Directive 89/336/EEC “EMC Directive”,  
73/23/EEC “Low Voltage Directive” as amended by Directive 93/68/EEC and 93/42/EEC “Medical Devices  
Directive”.  
The electro-magnetic susceptibility has been chosen at a level that gives correct operation in residential  
areas, business and light industrial premises and small-scale enterprises, inside as well as outside of the  
buildings. All places of operation are characterized by their connection to the public low voltage power supply  
system.  
We reserve the right to change specifications without notice.  
All trademarks used in this user manual are the property of their respective owners.  
As an ENERGY STAR® Partner, iiyama has determined that this product meets the ENERGY STAR® guidelines for  
energy efficiency.  
 
FOR YOUR SAFETY  
SAFETY PRECAUTIONS  
WARNING  
STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE  
If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the  
monitor and contact your dealer or iiyama service center immediately. Further use may be dangerous  
and can cause fire or electric shock.  
NEVER REMOVE THE CABINET  
High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of  
fire or electric shock.  
DO NOT PUT ANY OBJECT INTO THE MONITOR  
Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug  
your monitor immediately and contact your dealer or iiyama service center. Using the monitor with  
any object inside may cause fire, electric shock or damage.  
INSTALL THE MONITOR ON A FLAT, STABLE SURFACE  
The monitor may cause an injury if it falls or is dropped.  
DO NOT USE THE MONITOR NEAR WATER  
Do not use the monitor where water may be splashed or spilt on the monitor as it may cause fire  
or electric shock.  
OPERATE UNDER THE SPECIFIED POWER SUPPLY  
Be sure to operate the monitor only with the specified power supply. Use of an incorrect voltage  
will cause malfunction and may cause fire or electric shock.  
PROTECT THE CABLES  
Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy  
objects on the cables. If damaged, the cables may cause fire or electric shock.  
ADVERSE WEATHER CONDITIONS  
It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in  
power may cause malfunction. It is also advised not to touch the plug in these circumstances as  
it may cause electric shock.  
CAUTION  
INSTALLATION LOCATION  
Do not install the monitor where sudden temperature changes may occur, or in humid, or dusty or  
smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where  
the sun shines directly on the monitor.  
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION  
The monitor may topple and cause injury if not suitably located. Please also ensure that you do not  
place any heavy objects on the monitor, and that all cables are routed such that children may not  
pull the cables and possibly cause injury.  
1
FOR YOUR SAFETY  
 
CAUTION  
MAINTAIN GOOD VENTILATION  
Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause  
fire. To allow adequate air circulation, place the monitor at least 10 cm (or 4 inches) from any walls.  
Do not remove the tilt stand when operating the monitor. Ventilation slots on the cabinet bottom will  
be blocked and the monitor may overheat if the stand is removed. This may cause fire or damage.  
Operating the monitor on its back, side, upside down or on a carpet or any other soft material may  
also cause damage.  
DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR  
When you move the monitor, turn off the power switch, unplug the monitor and be sure the signal  
cables are disconnected. If you do not disconnect them, it may cause fire or electric shock.  
It is recommended that two people are used when moving the monitor.  
UNPLUG THE MONITOR  
The power cable is the disconnect device. If the monitor is not in use for a long period of time it is  
recommended that the power cable it is left unplugged to avoid accidents.  
HOLD THE PLUG WHEN DISCONNECTING  
To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable  
itself as this may cause fire or electric shock.  
DO NOT TOUCH THE PLUG WITH WET HANDS  
Pulling or inserting the plug with wet hands may cause electric shock.  
DO NOT PUT FLOPPY DISKS NEAR THE MONITOR  
Magnetic data recordings such as on a floppy disk may disappear if they are placed on or near the  
monitor as the degauss circuit causes a strong momentary magnetic field.  
WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER  
Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may  
damage your computer.  
OTHERS  
ERGONOMIC RECOMMENDATIONS  
To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room.  
For optimal viewing comfort, the monitor should be just below eye level and 40-60 cm (16-24  
inches) away from your eyes. When using the monitor over a prolonged time, a ten minute break  
every hour is recommended as looking at the screen continuously can cause eye strain.  
MAGNETIC FIELD INFLUENCE  
Place the monitor away from TV, speaker systems or any other source of strong magnetic fields.  
The monitor may be noisy or the screen's output may be distorted as a result of interference from  
other appliances.  
INTENDED APPLICATION  
The monitor can be also used in a medical environment to display video signal from computer or  
other system. The monitor is not suitable for use in areas that patients are cared for.  
FOR YOUR SAFETY  
2
 
OTHERS  
UNSUITABLE LOCATION FOR USING THE MONITOR  
The monitor is not suitable for use in the presence of a FLAMMABLEANAESTHETIC MIXTURE WITH  
AIR or WITH OXYGEN OR NITROUS OXIDE.  
The monitor is not suitable for use in areas that patients are cared for. This encloses a space  
within the room 1.83 m (6 feet) beyond the perimeter of the bed (examination table, dental chair,  
treatment booth, and the like) in its intended location, and extending vertically 2.29 m (7-1/2 feet)  
above the floor.  
CUSTOMER SERVICE  
NOTE  
If you have to return your unit for service and the original packaging has been  
discarded, please contact your dealer or iiyama service center for advice or  
replacement packaging.  
CLEANING  
WARNING  
If you drop any materials or liquids such as water into the monitor when cleaning,  
unplug the power cable immediately and contact your dealer or iiyama service  
center.  
CAUTION  
NOTE  
For safety reasons, turn off the power switch and unplug the monitor before you  
clean it.  
The CRT screen is protected by an anti-reflection & anti-static coating. Do not scratch or  
rub the screen with a hard object, as this could damage the coating.  
Never use any of the following strong solvents. These will damage the cabinet and  
the CRT.  
Thinner  
Spray-type cleaner  
Wax  
Benzine  
Abrasive cleaner  
Solvent for cleaning glass  
Solvent with anti-static agent  
Acid or Alkaline solvent  
Alcohol solvent  
CABINET  
CRT  
Stains can be removed with a cloth lightly moistened with a mild detergent solvent.  
Then wipe the cabinet with a soft dry cloth.  
Wipe the CRT with an enclosed cleaning cloth to remove smudges (such as  
fingerprints). Tough stains can be removed with a cloth lightly moistened with water  
or mild detergent diluted by 10%. Make sure to wipe the CRT surface using a sideling  
movement.  
3
FOR YOUR SAFETY  
 
BEFORE YOU OPERATE THE MONITOR  
FEATURES  
Crisp, Clear Display for Windows® or Macintosh  
Supports Resolutions up to 1920×1440  
Supports Refresh Rate up to 85Hz at 1600×1200  
Plug & Play VESA DDC2B Compliant (D-Sub Input only)  
Windows® 95/98/2000/Me/XP Compliant  
Supports sRGB International Standard  
Power Management (ENERGY STAR® and VESA DPMS Compliant)  
Space Saving, Compact Case Design  
Ergonomic Design: TCO ’03 and MPR3Approved  
Medical Standard Compliant  
ACCESSORIES  
The following accessories should be included in the Vision Master packaging. Please ensure that  
all of them are enclosed.  
Power Cable *  
Signal Cable MB38 (For D-Sub connection)  
Cleaning Cloth  
User Manual  
CAUTION  
* TO USERS IN 120V AREA  
The rating of the Power Cable enclosed in 120V area is 10A / 125V. If you are using  
a power supply higher than this rating, then a power cable with a rating of 10A /  
250V must be used.  
BEFORE YOU OPERATE THE MONITOR  
4
 
FOR WINDOWS 95/98/2000/ME/XP USERS  
Windows 95/98/2000/Me/XP Monitor Information File for iiyama monitors may be obtained via the  
Internet, using the address:  
NOTE For additional information on how to download the driver for your monitor, please  
access one of the internet sites noted above.  
Monitor Drivers are not required in most cases for Macintosh or Unix operating  
systems. For further information, please contact your computer dealer first for advice.  
5
BEFORE YOU OPERATE THE MONITOR  
 
LOCATION OF CONTROLS  
Power Indicator  
Stand-by Switch  
A
B
(
: Stand-by Symbol)  
OPQ Button (OPQ) = Optimize Picture Quality  
Switch OPQ function between ON and OFF  
whenever pressing the OPQ Button. Turn  
ON the OPQ function to get the optimum  
picture quality when displaying DVD or other  
moving pictures.  
C
[On screen display] OPQ ON:  
OPQ OFF:  
The OPQ setting is not saved.  
The OPQ function is turned OFF  
when turning OFF the Power  
Switch. Color temperature is  
fixed to the factory preset 9300K  
while the OPQ function is active.  
NOTE  
+ Button  
– Button  
D
E
F
Menu Button  
Input Select Button (VIDEO 1/2)  
G
Select either VIDEO IN 1 or 2 for the signal  
input when both of the signal inputs are  
connected to a signal source. Switch VIDEO  
IN 1 and 2 whenever pressing Input Select  
Button for 2-3 seconds.  
NOTE  
When only one of the two signal  
inputs is connected to the signal  
source, automatic signal input  
selection occurs only with the initial  
turning ON of the Power Switch.  
AC Connector (AC IN)  
H
I
J
D-Sub mini 15pin Connector (VIDEO IN 1)  
D-Sub mini 15pin Connector (VIDEO IN 2)  
BEFORE YOU OPERATE THE MONITOR  
6
 
CONNECTING YOUR MONITOR  
Ensure that both the computer and the monitor are switched off.  
A
B
Connect the computer to the monitor with the signal cable. (See page 17 for CONNECTOR  
PINASSIGNMENT.)  
Connect the Power Cable to the monitor first and then to the power supply.  
C
NOTE  
The signal cables used for the connection vary by the type of computers you use. An  
incorrect connection may cause serious damage to both the monitor and the computer.  
The cable supplied with the monitor is for a standard 15 pin D-Sub connector. If a  
special cable is required please contact your local iiyama dealer or regional iiyama  
office.  
For connection to Macintosh computers, contact your local iiyama dealer or regional  
iiyama office for a suitable adaptor.  
Make sure you tighten the finger screws at each end of the signal cable.  
7
BEFORE YOU OPERATE THE MONITOR  
 
OPERATING THE MONITOR  
To create the best picture, your iiyama Vision Master has been preset at the factory with the signal  
timings listed on page 17 in PRESET MODES. If an incorrect picture appears during the operation,  
adjust the image by following the procedure shown below to get the desired picture.  
After selecting an item in the Main Menu, the adjustments and settings  
are made in the Sub-Menu.  
Main Menu appears on the screen when you press the Menu  
Button.  
For example, to adjust the horizontal screen size, select  
(Screen Control) on the Main Menu by using the +/– Buttons. The  
Sub-Menu appears when you press the Menu Button.  
B
Menu  
RB  
FUNC  
Adjustment icon  
Adjustment menu  
presently selected  
Screen Control  
Select  
(H-Size) on the Sub-Menu by using the +/– Buttons. An  
C
adjustment scale will turn white when you press the Menu Button.  
Use the +/– Buttons to adjust the horizontal screen size. See  
ADJUSTMENT MENU CONTENTS on next pages for further information.  
Screen Control  
Adjustment icon  
Adjustment menu  
presently selected  
H-Size  
-
The line shows the  
progress of the  
adjustment being  
made.  
·························  
|||||||||||||||||||||||||  
+
NOTE  
The On Screen Display disappears in optional setting seconds after you stop pressing the  
buttons while performing an adjustment. (See page 11 for OSD Off Timer.)  
Adjustments for Size, Position, Pin-Cushion and Trapezoid are saved for each signal timing.  
Except for these adjustments, all other adjustments such as Color, Parallelogram, Convergence,  
Moire and Landing have only one setting which applies to all signal timings.  
OPERATING THE MONITOR  
8
 
ADJUSTMENT MENU CONTENTS  
Main Menu  
Sub-Menu  
Problem / Option  
Button to Press  
Too dull  
Direct  
Direct  
Contrast  
Too intense  
Color  
Control  
Too dark  
Brightness  
Color Temp.  
Too bright  
Reddish white  
Bluish white  
COLOR  
Color temperature is adjustable sRGB and between approximately  
10000K and 4500K. The factory preset is 9300K.  
NOTE  
Color temperature is fixed to the factory preset 9300K while the OPQ  
function is active.  
sRGB  
Procedure  
To access the sRGB mode, select the Color Temp. function and select 10000K by  
pushing the + button. Hold down the + button and sRGB function will be activated.  
When this mode is activated the color temperature is approximately 6500K.  
To deactivate the sRGB mode, push the – button while the Color Temp. is selected.  
sRGB is an international standard which defines and unifies the  
difference of color appearance between equipment.  
You can not adjust the Contrast and Brightness during sRGB mode  
because those settings are locked.  
NOTE  
Return to Menu  
Return to Main Menu.  
Direct  
You can skip the Menu pages and display an adjustment scale directly by using the following  
button operations.  
Contrast:  
Press the +/– Buttons when the Menu is not displayed.  
Brightness: Press the +/– Buttons and then the Menu Button continuously when the  
Menu is not displayed.  
NOTE  
SWITCHING CONTRAST/ BRIGHTNESSADJUSTMENT  
To switch between Contrast and Brightness adjustments, press the Menu Button  
within 2 seconds after pressing the +/– Buttons during the direct adjustments above.  
The On Screen Display disappears approx. 3 seconds after you stop pressing the  
buttons while performing the direct adjustment, irrespective of OSD Off Timer setting.  
(See page 11 for OSD Off Timer.)  
9
OPERATING THE MONITOR  
 
Main Menu  
Sub-Menu  
Zoom  
Problem / Option  
Button to Press  
Too small  
Too large  
Screen  
Control  
Too small  
Too large  
H-Size  
Too far to the left  
H-Position  
V-Size  
Too far to the right  
Too small  
Too large  
Too low  
Too high  
V-Position  
Return to Menu  
Pin-Cushion  
Trapezoid  
Return to Main Menu.  
To correct distortion  
To correct distortion  
To correct distortion  
To correct distortion  
To correct tilt  
Shape  
Parallelogram  
Pin-Balance  
Tilt  
Return to Menu  
Return to Main Menu.  
OPERATING THE MONITOR 10  
 
Main Menu  
Sub-Menu  
Problem / Option  
Button to Press  
To correct misconvergence  
for vertical lines  
H-Convergence  
To correct misconvergence  
for horizontal lines  
Picture  
Quality  
V-Convergence  
H-Moire  
To correct vertical  
wavy lines  
NOTE  
Moiré is the result of interference between the phosphor layout and the  
video signal. By changing the horizontal and vertical size, the moiré can be  
reduced. You may find the moiré more noticeable depending on the Desktop  
Pattern you select. In this case, change the desktop pattern. If moiré is still  
noticeable, use this function to reduce the effect. The picture may shake if  
extreme moiré correction is performed.  
Every time the monitor is switched on,  
Degauss  
the monitor is automatically degaussed.  
But occasionally the colors change when  
NOTE  
Degauss should not be  
moving or swiveling the monitor. In this  
case, first try the “Raster Rotation”  
adjustment. If the problem persists, select  
Degauss.  
repeated continuously. Wait at least  
30 minutes between degaussing  
operations. While degaussing, the  
picture shakes and a low sound  
occurs but this does not indicate a  
problem, it is normal.  
Return to Menu  
Top-Left  
Return to Main Menu.  
To correct  
discoloration  
Landing  
To correct  
Top-Right  
discoloration  
To correct  
Bottom-Left  
Bottom-Right  
Raster Rotation  
Return to Menu  
discoloration  
To correct  
discoloration  
To correct  
discoloration  
Return to Main Menu.  
11 OPERATING THE MONITOR  
 
Main Menu  
Function  
Sub-Menu  
Problem / Option  
Button to Press  
Too far to the left  
Too far to the right  
OSD H-Position  
Too low  
Too high  
OSD V-Position  
OSD Off Timer  
3 5 15 30 45 sec  
You can set the OSD display time to any  
one of the above 5 settings.  
English  
English  
German  
French  
Dutch  
Language  
Deutsch  
Français  
Nederlands  
Svenska  
Japanese  
On  
Swedish  
Japanese  
All adjustment items except this function  
are locked out.  
Lockout  
Off  
Lockout is canceled.  
Any changes are automatically saved in  
the memory when the On Screen Display  
disappears.  
Auto  
Save Recall  
Turning off the power should be avoided while  
using the Menu.  
NOTE  
Every time the adjustment is performed,  
“Save the changes?” appears on the  
screen. Select “Yes” to save the  
adjustment data. Select “No” to cancel  
the adjustment data so that the screen  
returns to the former condition.  
Manual  
Factory-preset data is restored.  
Reset  
Performing this operation resets any adjustment  
data made by the user to the factory-preset  
frequencies. The following settings made by the  
user for signals other than the factory-preset  
timings remain unchanged.  
NOTE  
H-Size  
V-Size  
Pin-Cushion  
H-Position V-Position Trapezoid  
Return to Menu  
Return to Main Menu.  
OPERATING THE MONITOR 12  
 
Main Menu  
Sub-Menu  
Option  
On  
Every time you select the sub-menu icon,  
the online balloon help appears to  
indicate the menu contents or adjustment  
procedure.  
Help  
Help  
Off  
The online balloon help is off.  
The model name, serial number, current  
signal input, and scan rates are displayed  
in the function.  
Information  
Return to Menu  
Return to Main Menu.  
POWER MANAGEMENT FEATURE  
The power management feature of this product complies with every power saving requirement of  
ENERGY STAR® and VESA DPMS. When activated, it automatically reduces unnecessary power  
consumption of the monitor when your computer is not in use.  
To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer. There  
is a power management step the monitor takes as described below. The power management  
function, including any timer settings is configured by the operating system. Check your operating  
system manual for information on how this can be configured.  
Power Management Mode  
When the H-sync signal / V-sync signal / H and V sync signals from the computer are off, the  
monitor enters into Power Management Mode which reduces the power consumption to less  
than 5W. The screen becomes dark, and the power indicator turns to orange. From Power  
Management Mode, the image reappears in 10 seconds when either the keyboard or the mouse  
are touched again.  
Power Indicator  
NORMAL MODE  
Green  
POWER MANAGEMENT MODE  
Orange  
POWER  
0
5W  
100%  
CONSUMPTION  
Even when using the power management mode, the monitor consumes electricity. Turn  
off the Power Switch whenever the monitor is not used, during the night and weekends,  
to avoid unnecessary power consumption.  
NOTE  
13 OPERATING THE MONITOR  
 
TROUBLE SHOOTING  
If the monitor fails to operate correctly, please follow the steps below for a possible solution.  
1.  
Perform the adjustments described in OPERATING THE MONITOR, depending on the problem  
you have.  
2. Consult the following charts if you cannot find an appropriate adjustment item in OPERATING  
THE MONITOR or if the problem persists.  
3.  
If you are experiencing a problem which is not described below or you cannot correct the  
problem, discontinue using the monitor and contact your dealer or iiyama service center for  
further assistance.  
Problem  
Check  
The picture does  
not appear.  
A
(Power indicator  
does not light up.)  
The Power Cable is firmly seated in the socket.  
The Power Switch is turned ON.  
The AC socket is live. Please check with another piece of equipment.  
If the blank screen saver is in active mode, touch the keyboard or the mouse.  
Increase the Contrast and/or Brightness.  
(Power indicator  
is green.)  
The computer is ON.  
The Signal Cable is properly connected.  
The signal timing of the computer is within the specification of the monitor.  
(Power indicator  
is orange.)  
If the monitor is in power management mode, touch the keyboard or the  
mouse.  
The computer is ON.  
The Signal Cable is properly connected.  
The signal timing of the computer is within the specification of the monitor.  
The monitor selects the correct signal input. Press the Input Select  
Button once to check.  
The screen is not  
synchronized.  
The Signal Cable is properly connected.  
The signal timing of the computer is within the specification of the monitor.  
B
The video output level of the computer is within the specification of the  
monitor.  
The screen  
position is not in  
the center.  
The signal timing of the computer is within the specification of the  
monitor.  
C
D
The screen is  
too bright or too  
dark.  
The video output level of the computer is within the specification of the  
monitor.  
The screen may be too bright due to the video output level difference of  
the computer. In this case, adjust the Contrast.  
The screen is  
shaking.  
Check if there are any sources of strong magnetic fields such as TV,  
speakers, etc. nearby.  
E
If yes, remove them from the area of the monitor or change the position/  
direction of the monitor to avoid magnetic field interference.  
The power voltage is within the specification of the monitor.  
The signal timing of the computer is within the specification of the monitor.  
Moiré correction is working properly.  
TROUBLE SHOOTING 14  
 
Normal phenomenon on ‘Diamondtron NF-CRT’ monitors  
Misalignment of Aperture Grille  
Due to the nature of the Diamondtron NF-CRT, in rare cases, a misalignment of the aperture grille  
may happen by the shock or vibration caused during transportation. If a black vertical line appears  
on the screen, apply a light shock to the side of the monitor with your hand. If the problem persists,  
follow the procedure below.  
Display a full white picture and inspect the problem area.  
A
B
Display a high-white picture that covers the problem area to shoot a strong electron beam.  
Leave it for a while, until the problem disappears.  
Damper Wires  
The two faint horizontal lines that may be visible on the screen are actually the shadows of steel  
wires called Damper Wires. All Diamondtron NF-CRT based monitors have these wires for structural  
reasons.  
15 TROUBLE SHOOTING  
 
APPENDIX  
SPECIFICATIONS  
CRT  
22" (20.0" / 51cm viewable), Aperture Grille pitch: 0.24mm,  
Diamondtron NF-CRT, 90 degree deflection,  
Short persistence phosphor, Anti-reflection & Anti-static coating  
Sync Frequency  
Video Bandwidth  
Horizontal: 30.0-117.0kHz, Vertical: 50-180Hz  
300MHz dot clock  
Recommended Resolution 1280 × 1024 at 85Hz  
Input Connector  
Plug & Play  
D-Sub mini 15pin × 2  
VESA DDC2B™  
Input Sync Signal  
Separate sync:  
Composite sync:  
Sync on green:  
TTL, Positive or Negative  
TTL, Positive or Negative  
0.3Vp-p, Negative  
Input Video Signal  
Number of Signal  
Storage  
Analog: 0.7Vp-p (Standard), 75ꢀꢁꢂPositive  
Factory-presets:  
7
User defined settings:  
10 maximum  
Standard Screen Size  
395mm W × 295mm H / 15.6" W × 11.6" H  
Power Source  
100-230V , 50/60Hz, 1.85-0.8A ( : Alternating Current Symbol)  
140W maximum in normal use  
Power Consumption  
Power management mode: 5W maximum  
Dimensions, Net Weight 493 × 487 × 479mm / 19.4 × 19.2 × 18.9" (W × H × D), 28kg / 61.7lbs  
Tilt-Swivel Angle  
Right / Left: 45 degrees each, Up: 15 degrees, Forward: 5 degrees  
Environmental  
Considerations  
Operating:  
Temperature  
Humidity  
0 to 35°C / 32 to 95°F  
10 to 80% (No condensation)  
Altitude limitations Not more than 3,000m  
Storage/Transport: Temperature  
Humidity  
-20 to 60°C / -4 to 140°F  
5 to 90% (No condensation)  
Altitude limitations Not more than 12,000m  
Approvals  
TCO ’03, CE, TÜV-GS (EN60950*) / TÜV-GM (EN60601-1*) /  
MPR3(prEN50279) / ISO 9241-3/ISO 9241-7/ISO 9241-8, PTB, FCC-B,  
UL/C-UL (UL60950, UL2601-1), DHHS, Department of Health (Canada)  
* Protection Class: Class 1, EMC Class: Class B, Group 1  
493mm/19.4"  
479mm/18.9"  
406mm/16.0"  
APPENDIX 16  
 
PRESET MODES  
The following chart indicates the Factory Preset Modes.  
Sync Polarity  
Vertical  
Horizontal  
VESA Timing Name  
Frequency  
Frequency  
H
V
1
2
3
4
5
6
7
640×400 @70Hz  
640×480 @60Hz  
640×480 @85Hz  
800×600 @85Hz  
1024×768 @85Hz  
1280×1024 @85Hz  
1600×1200 @85Hz  
31.47kHz  
31.47kHz  
43.27kHz  
53.67kHz  
68.68kHz  
91.15kHz  
106.25kHz  
70.0Hz  
59.9Hz  
85.0Hz  
85.1Hz  
85.0Hz  
85.0Hz  
85.0Hz  
Negative  
Positive  
Negative Negative  
Negative Negative  
Positive  
Positive  
Positive  
Positive  
Positive  
Positive  
Positive  
Positive  
Additional adjustments may be required to the factory-presets, because the signal  
timings vary depending on the type of graphics board you use.  
NOTE  
CONNECTOR PIN ASSIGNMENT  
D-Sub mini 15pin  
Pin  
1
Input Signal  
Red video  
Pin  
Input Signal  
Connector  
9
2
10 Ground  
Green video / Sync on green  
Blue video  
11  
12  
Ground  
Data line (SDA) *  
3
4
5
13 H-Sync / HV-Sync  
6
Red video ground  
Green video ground  
Blue video ground  
V-Sync  
14  
15  
7
Clock line (SCL) *  
* Compliant to VESA DDC.  
8
CLASSIFICATION MARK  
WITH RESPECTTO ELECTRIC SHOCK, FIREAND MECHANICALHAZARDS ONLY  
INACCORDANCE WITH UL2601-1 <43RB>  
WITH RESPECT TO ELECTRIC SHOCK, FIRE MECHANICAL  
AND OTHER SPECIFIED HAZARDS ONLY  
INACCORDANCE WITH CAN/CSAC22.2 NO. 601.1,  
MEDICAL EQUIPMENT CERTIFIED FOR CANADA <43RB>  
17 APPENDIX  
 
IIYAMA CORPORATION  
710-1 Kitaowaribe, Nagano-shi 381-0014 Japan  
This manual is printed on recycled paper.  
Dieses Handbuch ist auf Recyclingpapier gedruckt.  
Ce manuel est imprimé sur du papier recyclé.  
Deze handleiding is op kringlooppapier gedrukt.  
Handboken har tryckts på returpapper.  
Questo manuale è stampato su carta riciclata.  
Part No. 870Z257A01  
 

Graco Baby Playpen PD187711B User Manual
Harman Kardon Stereo Receiver HK 3470 User Manual
Hotpoint Oven UQ891 User Manual
Hotpoint Refrigerator FF187E User Manual
HP Hewlett Packard Computer Monitor C9V73A8#ABA User Manual
HP Hewlett Packard Personal Computer dc5100 User Manual
HP Hewlett Packard Switch SN6000 User Manual
Huffy Board Games isplay Unit User Manual
ICP DAS USA Computer Hardware 3 axis encoder card 2 axis stepping servo User Manual
Impex Home Gym TSA 5761 User Manual