IKEA Cooktop HIN1T User Manual

NUTID  
HIN1T  
 
AA-400491-1  
5
 
4x  
4x  
6
AA-400491-1  
 
5 mm  
5 mm  
7
 
Min. 5 cm - MAX 13,5 cm  
Min. 10 cm  
Min. 3,8 cm  
R = Min 6 mm  
Max 8 mm  
336 mm  
336 mm  
AA-400491-1  
8
 
9
 
AA-400491-1  
10  
 
4 x  
11  
 
DEUTSCH  
ENGLISH  
FRANÇAIS  
NEDERLANDS  
ESPAÑOL  
PORTUGUÊS  
ITALIANO  
SVENSKA  
NORSK  
Gebrauchsanweisung  
Instructions for use  
Mode d’emploi  
Seite 13  
Page 20  
Page 27  
Gebruiksaanwijzing  
Instrucciones para el uso  
Manual de utilização  
Istruzioni per l’uso  
Bruksanvisning  
Pagina 34  
Página 41  
Página 48  
Pagina 55  
Sidan 62  
Sidan 69  
Sidan 76  
Sivu 83  
Bruksanvisning  
DANSK  
Brugsanvisning  
SUOMI  
Käyttöohje  
POLSKI  
Instrukcje użytkowania  
Návod k použití  
Strona 90  
Strana 97  
ČESKY  
SLOVENSKY  
MAGYAR  
РУССКИЙ  
Návod na použitie  
Használati utasítás  
Инструкции по эксплуатации  
Strana 10  
4
Oldal 111  
Страница 118  
12  
 
INSTRUCTIONS FOR USE  
BEFORE USING THE APPLIANCE  
DECLARATION OF CONFORMITY  
PRECAUTIONS AND GENERAL  
RECOMMENDATIONS  
HOW TO USE YOUR HOB  
COOKING TIPS  
ENERGY SAVING TIPS  
MAINTENANCE AND CLEANING  
TROUBLESHOOTING GUIDE  
AFTER-SALES SERVICE  
ELECTRICAL CONNECTION  
20  
 
BEFORE USING THE APPLIANCE  
Before use, remove:  
The symbol  
on the product, or on the  
documents accompanying the product, indicates  
that this appliance may not be treated as  
household waste. Instead it shall be handed over  
to the applicable collection point for the recycling  
of electrical and electronic equipment.  
Disposal must be carried out in accordance with  
local environmental regulations for waste  
disposal.  
- all stickers on the cooktop;  
- protective cardboard packaging and protective  
plastic film;  
- Check whether the cooktop has been  
damaged during transport. If you are  
uncertain, contact the After-Sales Service.  
Keep the packaging material (plastic bags,  
polystyrene parts, etc.) out of the reach of  
children, as they are potentially dangerous.  
For more detailed information about treatment,  
recovery and recycling of this product, please  
contact your local city office, your household  
waste disposal service or the shop where you  
purchased the product.  
The packaging material is entirely recyclable, and  
is marked with the recycling symbol  
.
This appliance is marked according to the  
European directive  
2002/96/EC on Waste Electrical and Electronic  
Equipment (WEEE).  
By ensuring this product is disposed of correctly,  
you will help prevent potential negative  
consequences for the environment and human  
health, which could otherwise be caused by  
inappropriate waste handling of this product.  
Ensure that the installation and electrical  
connections are performed by a qualified  
technician, following the manufacturer’s  
instructions and in compliance with current local  
safety regulations.  
CAUTION: This cooktop complies with all  
applicable safety and electromagnetic compatibility  
legislation.  
However, persons with pacemaker should keep at  
a safe distance from the appliance. This is because it  
is not possible to guarantee that all pacemakers on  
the market comply with the standards in  
compliance with which this appliance was tested so  
it is not possible to provide an absolute guarantee of  
the absence of potentially harmful interference.  
DECLARATION OF CONFORMITY  
The appliance has been designed, constructed  
DECLARATION OF CONFORMITY  
and sold in compliance with:  
This cooktop is suitable for contact with  
foodstuffs and complies with  
EEC (CE) Regulation n. 1935/2004  
This appliance has been designed to be used  
exclusively for cooking food. Any other use (e.g.  
for room heating) is to be considered improper  
and consequently dangerous.  
- safety objectives of the “Low Voltage” Directive  
2006/95/CE (which replaces 73/23/CEE and  
subsequent amendments).  
- protection requirements of  
“EMC” Directive 89/336/EEC;  
Requirements of Directive 93/68/EEC.  
21  
 
PRECAUTIONS AND GENERAL  
RECOMMENDATIONS  
Attention:  
Do not place metal objects such as knives, forks,  
spoons or lids on the surfaces of the hob as they  
can become hot.  
Before any maintenance on the appliance  
disconnect it from the electrical power supply.  
The glass ceramic induction hob has good  
mechanical resistance and is designed to  
withstand minor accidents and incorrect usage;  
however, if an object falls on it and damages the  
surface, do not use the hob. Disconnect it from  
the electrical power supply and call the nearest  
After Sales Service.  
When the hob is in use, the surfaces of the cooking  
zones may heat up due to transfer of heat from  
foods being cooked to the pot and subsequently to  
the glass.  
The distance between the lower face of the glass  
ceramic hob and the cupboard or separating  
panel must be at least 40 mm.  
If the glass ceramic surface should break or crack,  
do not use it, but call the After-sales Service  
immediately.  
This cooktop is designed solely for use as a  
domestic appliance for cooking food. No other  
type of use is permitted. The manufacturer  
declines all liability for improper use or incorrect  
use of the controls.  
To obtain the best cooking results, it is advisable  
to use flat-bottomed metal pots and pans whose  
bottom diameter corresponds to that of the  
induction cooking zones, so that the magnetic  
sensor detects them. To check that pots and  
pans are made of ferrous metal, use a magnet.  
The diameter of the pots and pans must  
correspond to the diameter of the induction  
cooking zone.  
When using pots and pans with a non-stick surface  
(such as Teflon) without any oil or grease, pre-heat  
by setting to number 7 or 8.  
Never heat canned foods without first  
having opened the can: they can explode!  
This warning also applies to all other types  
of cooktops.  
Do not use aluminium foil for cooking and do not  
place food wrapped in aluminium foil on the glass  
ceramic induction hob. Never place metal  
utensils on the hob.  
Note: the cooking zones will not go on if the pots  
and pans are not of the correct dimensions or  
cannot be magnetically detected. If a pot or pan is  
removed from the hotplate, it will go off.  
The hotplate will remain switched off until  
another pot or pan is placed on it.  
Avoid exposing the cooktop to atmospheric  
agents.  
Any repairs or maintenance work on the  
appliance must be carried out exclusively by a  
qualified technician.  
Never touch the cooktop with any wet part of  
the body and do not operate it with bare feet.  
This appliance is not intended for use by persons  
(including children) with reduced physical,  
sensory or mental capabilities or lack of  
experience and knowledge unless they have been  
given initial supervision or instruction concerning  
use of the appliance by a person responsible for  
their safety.  
Prevent children from coming into contact with:  
- the cooktop in general in order to avoid injury.  
- While it is on and after it has just been switched  
off, the cooktop reaches very high  
temperatures;  
- packaging materials (plastic bags, polystyrene  
parts, metal parts, etc.);  
- an old cooktop to be scrapped.  
Make sure that the electrical wires of other  
electrical appliances near the cooktop do not  
come into contact with hot parts.  
Never leave the cooktop unattended if you are  
using a lot of fat or oil: risk of oil or fat  
overheating and catching fire!  
Do not use the cooktop surface as a work surface.  
Do not switch on the hotplates/cooking zones  
without pots.  
TO OBTAIN THE BEST RESULTS:  
Make sure you place the pot or pan in the centre  
of the cooking zone outlined on the glass ceramic  
induction hob.  
Do not place plastic, aluminium foil, cloths, paper  
etc. on the hotplates/cooking zones while they  
are still hot.  
The cooktop features hotplates/cooking zones of  
different sizes. Use pots and pans whose bottom  
diameter is equal to, or slightly larger than, that of  
the hotplates/cooking zones.  
22  
 
HOW TO USE YOUR HOB  
1. Induction cooking zone Ø180  
2. Display  
1
2
A
C
E
B
D
F
A
B
Childproof Lock  
Cooking zone activation button  
Heat setting decrease  
D
E
F
Heat setting increase  
Timer  
C
ON/OFF  
Operation Instructions  
6. Timer  
1. Put the pot on the hotplate.  
Put the pot in the centre of the ceramic plate.  
Make sure the air vent and the air entry are not  
blocked and there are not metallic objects  
around the hot plate.  
2. Plug in  
After the power on, the buzzer sounds.  
3. Turn on  
When the “on/off” button is pressed, the buzzer  
sounds. The “ ” indicator lamp lights up, the  
LED display “--”, indicating that the hotplate is in  
the state of stand-by.  
If you don’t press any key within 2 minutes, the  
induction hotplate will shut down automatically.  
4. Heating  
In working state, after the “ ” key is pressed,  
the buzzer gives out a sound, the maxi tube  
flashes and displays “0”, indicating that the  
induction hotplate enters timing setting state.  
Each time the “ ” or “ ” key is pressed, the  
time can increase or decrease by 1 minute. If it is  
held, the time will increase or decrease quickly  
with 10 minutes as an increment. When the timer  
is max., then press the “ ” key, the time will  
resume min. When the timer is min., then press  
the “ ” key, the time will resume max.  
After timing period is set, the time stabilizes after  
the nixie tube flashes for 5 seconds to confirm  
the period to be effective. If the time is 0, the  
timer is non effective.  
In the timing setting state, pressing the timer  
button again will confirm the time.  
In the timing setting state, if you hold the timer key,  
the timer will be cancelled, the LED displays “--”.  
When the working time reaches, the hotplate will  
shut down automatically.  
If the timer function isn’t selected, the hotplate  
will shut down automatically when the default  
shut down time of each level reaches. The default  
shut down time of each level are as follow:  
7. Shut down  
After using, please press the “ ” button, the  
induction hotplate will stop heating.  
After the power supply is connected, press the  
” button, then press the “ ” button, the  
buzzer sounds, the “ ” and the “ ” indicator  
lamp light up, the default power level shall be  
level 4, you can tune the power level to the max.  
level by holding the “ ” key.  
You can make a regulation by pressing the “  
or “ ” key.  
5. Childproof Lock  
When the hotplate is in working state, to prevent  
children from operation, you can activate the  
childproof lock by pressing the childproof lock  
button, the buzzer will sound at the same time.  
In the childproof lock state, “Childproof Lock”  
button and “ ” button can be operated, other  
buttons are non effective.  
The fan will run for a while to cool the induction  
hotplate down.  
8. Residual heat indicator  
If the pan has been removed or the hob has been  
switched off, and the hotplate is still hot. The  
indicator will display “H”, therefore, avoid touching  
the hotplate when the indicator is shown.  
You can deactivate the childproof lock by holding  
the childproof button again. The buzzer will sound.  
23  
 
COOKING TIPS  
Power level (1-8) Table for using the cooking zones  
1-2  
2
3-4  
4-5  
5
Melting butter, chocolate, etc.  
Keeping food warm and reheating small quantities of liquid  
Heating larger quantities, making custards and sauces  
Gentle simmering, for example: boiled vegetables, spaghetti, soups, pot roasts, stews  
For all fried food, cutlets, steaks, cooking without use of lid, for example: risotto  
Browning meats, roast potatoes, fried fish and to boil large quantities of water  
Brisk frying, griddling steaks, etc.  
6-7  
8
ENERGY SAVING TIPS  
Use pots and pans whose bottom diameter is equal to, or  
slightly larger than, that of the cooking zones.  
• Only use magnetic pots and pans with a flat bottom.  
Induction cooktops only work when used with pans and pots  
made of magnetic material. Suitable pans can be enamelled  
and made of cast iron or special steel: cookware  
manufacturers mark their products with the word  
“INDUCTION” on the base to indicate that they are  
compatible with induction cooktops.  
NO!  
Induction cooktops DO NOT WORK with cookware made of  
normal stainless steel, glass, ceramics, copper or aluminium.  
To check that pots and pans are made of ferrous (magnetic)  
material, use a magnet.  
The cooktop will provide optimal performance when used  
with induction-cooking compatible pans of a size that is the  
same as or slightly larger than the cooking area marked on the  
glass-ceramic hob.  
Make sure you place the pot or pan in the centre of the cooking  
zone outlined on the glass-ceramic induction cooktop.  
If possible, keep pot lids on when cooking.  
Cook vegetables, potatoes, etc. with little water in order to  
cut down cooking time.  
A pressure cooker allows you to save even more energy and  
time.  
Safety  
1. After use, when a hotplate or the entire hob is turned off, a  
residual heat indicator goes on displaying an H (hot),  
indicating that the corresponding cooking zone is still  
dangerously hot. The H stays on until the cooking zone has  
reached a safe level (around 60 °C).  
2. An automatic switch off device activates if a cooking zone is  
accidentally left on for a long time. It can be turned back on  
immediately if necessary by using the controls.  
3. To prevent damage to the electronic circuits, the hob is  
equipped with a sensor which constantly monitors the  
temperature of these circuits. In cases of overheating, the hob  
turns off automatically until a safe temperature is reached.  
4. To prevent children and others from improperly using the  
appliance and to prevent it from being accidentally switched  
on during cleaning operations, the hob is equipped with a  
safety lock, the key button. By pressing this button the hob  
is locked and the red LED turns on.  
24  
 
ENERGY SAVING TIPS  
Attention! if the surface is cracked, turn off the appliance to  
prevent the risk of electrical shocks and call the After Sales  
Service.  
If the Timer function is not used, the cooking zone switches off  
automatically after a fixed time that depends on the power level  
selected (see table).  
Level  
1
6
2
6
3
4
4
4
5
3
6
3
7
2
8
2
Time (hour)  
MAINTENANCE AND CLEANING  
Important: never clean the appliance with high pressure water  
or steam cleaning equipment.  
Clean the cooktop, when it is cool, after each use. This will  
prevent the build-up of dirt and make cleaning easier.  
Use a clean cloth, absorbent kitchen wipes and a mild washing up  
liquid or a specific glass ceramic cleaner.  
Remove baked-on dirt with the scraper tool (if supplied) and  
specific cleaning products.  
Food spills should be cleaned off before they bake onto the glass-  
ceramic surface.  
Do not use abrasive products, corrosive chlorine-based cleaners,  
oven-sprays or pan scourers.  
The cooktop should be treated periodically with a proprietary  
brand of protective cleaner, following the manufacturer's  
instructions.  
Important  
Periodically check for dust under the appliance, near the cooling  
air inlet or the outlet openings. This could hinder the ventilation  
and cooling of the electronic module and decrease the  
effectiveness of the hob.  
TROUBLESHOOTING GUIDE  
The glass ceramic induction hob does not work:  
Have you pressed the control buttons following  
the instructions in the section “using the hob”?  
Is there perhaps a power failure?  
Did you dry the hob carefully after cleaning it?  
2. If one of the following codes is displayed during  
use:  
E7 - E8  
wait a few seconds than the induction hotplate  
will operate as usual.  
3. If one of the following codes is displayed when  
the hob ON button is pressed:  
E1 - E2 - E4 - E5 - Eb - EC  
contact the After Sales Service and give them  
the code.  
1. If one of the following codes is displayed during  
use:  
E3 - E6  
wait a few minutes until the temperature of the  
appliance cools down. Than it will work as usual.  
Important!  
If you are not able to turn the glass ceramic  
induction hob off after using it, disconnect it  
immediately from the power supply.  
25  
 
AFTER-SALES SERVICE  
Before contacting After-Sales Service:  
under the cooktop) The service number is also  
indicated on the warranty booklet;  
See if you can solve the problem yourself with the  
help of the suggestions given in chapter  
“Troubleshooting Guide“.  
If after the above checks the fault persists,  
contact the nearest After-sales Service.  
Please give:  
your full address;  
your telephone number and area code.  
If any repairs are required, please contact an  
authorised After Sales Service (to guarantee  
that original spare parts will be used and repairs  
carried out correctly).  
a brief description of the fault;  
Failure to comply with these instructions may  
compromise the safety and quality of the  
product.  
the type and exact model of the cooktop;  
the service number (i.e., the number that follows  
the word SERVICE on the rating plate, located  
ELECTRICAL CONNECTION  
Before connecting the appliance to the electricity supply:  
The appliance must be installed by a qualified technician who is  
fully aware of current safety and installation regulations, which  
must be observed in their entirety.  
Make sure that the voltage indicated on the rating plate  
corresponds to the voltage in your home.  
The manufacturer declines all liability for injury to persons and  
animals or damage to property resulting from failure to observe  
the above regulations.  
For the electrical connection use a HO5VV-F or HO5V2V2-F  
type cable as indicated in the table below:  
Power supply voltage Conductors  
(number and size)  
2 X 1.0 mm2 min.  
230 V  
An all-pole disconnect switch with minimum contact gap  
equal to or greater than 3 mm must be used to install the  
hob.  
Attention: the power supply cable must be long enough to  
allow the hob to be removed from the worktop and must be  
positioned so as to avoid damage or overheating caused by  
contact with the base.  
The power supply cable must not be bent or compressed.  
The installer must ensure that the correct electrical connection  
has been made and that it is compliant with safety regulations.  
The power supply cable must be checked regularly. If it is  
damaged or needs to be replaced, the operation must be carried  
out by an After Sales technician with dedicated tools.  
After initial electrical connection or whenever turning the hob  
ON/OFF the buzzer sounds and the symbol “- -” will be  
displayed for few seconds.  
26  
 
18535  
© Inter IKEA System B.V. 2001  
AA-400491-1  
 

Graco Electric Heater 309524L User Manual
Graco Water Pump 222 252 User Manual
Graham Field Respiratory Product JB112 070 User Manual
Haier Flat Panel Television P42LV6 T1 User Manual
Hamilton Beach Egg Cooker 25500 User Manual
Honeywell Automobile Electronics 6160rf User Manual
Hotpoint Oven Accessories Cooker Hood User Manual
HP Hewlett Packard Computer Hardware A5992 90100 User Manual
HP Hewlett Packard Photo Printer 470 series User Manual
Huffy Board Games Table Top Basketball Game User Manual